Produktnavn:

VEGA Transfeed Automatic

Produktkategori:

Beskrivelse

The VEGA TRANSFEED AUTOMATIC is specially designed for laundries where productivity, efficiency and sustainability are the key words.
This remote feeding system gives you the flexibility to put the operators anywhere in the laundry and create a storage between the feeding stations and the flatwork feeder, which gives you an optimal occupation of the ironer.

The system is suitable for any hospitality or healthcare laundry where a lot of sheets, or duvets, needs to be processed.
Capacity of the VEGA TRANSFEED AUTOMATIC is up to 1200 pieces per hour in a single lane, and up to 1600 pieces per hour in a dual lane operation.

WORKING PRINCIPLE – In combination with VEGAMAT clipping station

Ideally, pieces are separated by a VEGA PICKER before distributed on a conveyor to the several feeding stations. The operator clips the first corner onto the specially designed VEGA TRANSFEED CLIP, then pushes the action button. Automatically, the first clip will move to the pre-programmed position helping the operator finding the second corner.
After the second corner is clipped the operator pushes the button again and the piece will go into the rail-system towards the correct storage-rail (VEGA TRANSRAIL).

From the rail system pieces are automatically transported to the VEGA TRANSFEED AUTOMATIC where the pieces, without any transfer from the clip, are spread by a servo-controlled spreading-clamp and placed on the vacuum lay-down beam.
Depending on the type of linen and settings, before the placement on the vacuum lay-down beam, a tilting device can support the linen to create a straight leading edge. The driven roller will slide the piece into the suction-box before the piece is placed on the vacuum table. With Brushers in the suction-box, as well as Stop and Stretching conveyors, the quality will be improved further before entering the ironer.
After finishing, for example the duvet covers, the system will automatically switch from storage lane, change speed and change settings of the ironer and folder to keep optimal productivity.

WORKING PRINCIPLE – In combination with VEGA ROBOFEED

Ideally, pieces are separated by a VEGA PICKER before distributed on a conveyor to the several VEGA ROBOFEEDS. The operator takes one corner and introduces it on to the driven conveyor belt. Automatically, the first corner is clipped and the machine will find the second corner and automatically measures the length of the piece. After clipping the second corner the piece is sent to correct buffer-line according to the measured size.

From the rail system, pieces are automatically transported to the VEGA TRANSFEED AUTOMATIC where the pieces, without any transfer from the clip, are spread by a servo-controlled spreading-clamp and placed on the vacuum lay-down beam.

Depending on the type of linen and settings, before the placement on the vacuum lay-down beam, a tilting device can support the linen to create a straight leading edge. The driven roller will slide the piece into the suction-box before the piece placed on the vacuum table. With Brushers in the suction box, as well as Stop and Stretching conveyors the quality of the piece will be enhanced further before entering the ironer.

After finishing, for example the duvet covers, the system will automatically switch from storage lane, change speed and change settings of the ironer and folder to keep optimal productivity.

CUSTOM BUILT SOLUTION

Depending on the space, design and pieces of the laundry the complete TRANSFEED AUTOMATIC system will be designed according to your specific needs, such as:

  • How many feeding stations for optimal occupation of the ironer
  • How many storage rails depending on types of customers and pieces
  • How many Feeders to have separate ironers for sheets and duvets
  • Special conveyors for sorting at the feeding stations
  • Customer separation system (if there are different customers)